目 录 上一节 下一节 查 找 检 索 手机阅读 总目录 问题反馈
参考文献
[1] GB/Т 25207—2010 火灾试验 表面制品的实体房间火试验方法
[2] GB/Т 31593.4—2015 消防安全工程指南 第4部分:探测、启动和灭火
[3] GB/T 31593.9—2015 消防安全工程 第9部分:人员疏散评估指南
[4] BabrauskasV,Burning Rates,The SFPE Handbook of Fire Protection Engineering 2nd
edition,Society of Fire Protection Engineers,Boston,MA US 1995,Section 3,Chapter 3-1.
[5] Walton WD,Thomas,PH,Estimating Temperatures in Compartments,The SFPE Handbook of Fire Protection Engineering 2nd edition,Society of Fire Protection Engineers,Boston,MA USA 1995,Section 3,Chapter 3-6.
[6] Drysdale D,An Introduction to Fire Dynamics,John Wiley and Sons,New York,USA 1985,Chapter 10.
[7] MARCHANT,R.,NABEEL,K.,WISE,S.,Development and Application of the Fire Brigade Intervention Model,Fire Technology,Vol.37(2001),pp.263-278.
[8] BENICHOU,N.,KASHEF, A.,HADJISOPHOCLEOUS,G.,Fire Department Response Model (FDRM) and Fire Department Effectiveness Model (FDEM) Theory Report, Internal Report No.842,Institute for Research in Construction,National Research Council Canada,Ottawa 2002.
[9] NFPA 204,Standard for Smoke and Heat Venting,National Fire Protection Assn,2002.
[10] OHLEMILLER,T.J.,Smouldering Combustion,The SFPE Handbook of Fire Protection Engineering 3rd edition,National Fire Protection Assn,2002,Section 2,Chapter 9.
[11] Babrauskas V, Lawson JR, Walton WD, Twilley WH, "Upholstered Furniture Heat Release Rates Measured with a Furniture Calorimeter”, NBSIR 82-2604,National Institute of Standards and Technology,Washington 1982.
[12] JANSSENS,M.,Calorimetry,The SFPE Handbook of Fire Protection Engineering 3rd edition,National Fire Protection Assn,2002,Section 3,Chapter 2.
[13] CBUF,Fire safety of upholstered furniture—The final report on the CBUF research pro- gramme ed.Sundstrom,B.,Interscience Communications Ltd,London 1996.
[14] WICKSTROM,U.,Application of the Standard Fire Curve for Expressing Natural Fires for Design Purposes,Fire Safety:Science and Engineering,ASTM STP 882 or SP-RAPP 1986: 19.EN 1991-l-2:2002,EuroCode 1.Actions on structures.General Actions.Actions on structures exposed to fires,Annex A.
[15] EN 1991-1-2 :2002, EuroCode 1. Actions on structures.General Actions.Actions on structures exposed to fires,Annex A.
[16] EN 1991-1-2:2002,EuroCode 1. Actions on structures.General Actions.Actions on structures exposed to fires, Annex B.
[2] GB/Т 31593.4—2015 消防安全工程指南 第4部分:探测、启动和灭火
[3] GB/T 31593.9—2015 消防安全工程 第9部分:人员疏散评估指南
[4] BabrauskasV,Burning Rates,The SFPE Handbook of Fire Protection Engineering 2nd
edition,Society of Fire Protection Engineers,Boston,MA US 1995,Section 3,Chapter 3-1.
[5] Walton WD,Thomas,PH,Estimating Temperatures in Compartments,The SFPE Handbook of Fire Protection Engineering 2nd edition,Society of Fire Protection Engineers,Boston,MA USA 1995,Section 3,Chapter 3-6.
[6] Drysdale D,An Introduction to Fire Dynamics,John Wiley and Sons,New York,USA 1985,Chapter 10.
[7] MARCHANT,R.,NABEEL,K.,WISE,S.,Development and Application of the Fire Brigade Intervention Model,Fire Technology,Vol.37(2001),pp.263-278.
[8] BENICHOU,N.,KASHEF, A.,HADJISOPHOCLEOUS,G.,Fire Department Response Model (FDRM) and Fire Department Effectiveness Model (FDEM) Theory Report, Internal Report No.842,Institute for Research in Construction,National Research Council Canada,Ottawa 2002.
[9] NFPA 204,Standard for Smoke and Heat Venting,National Fire Protection Assn,2002.
[10] OHLEMILLER,T.J.,Smouldering Combustion,The SFPE Handbook of Fire Protection Engineering 3rd edition,National Fire Protection Assn,2002,Section 2,Chapter 9.
[11] Babrauskas V, Lawson JR, Walton WD, Twilley WH, "Upholstered Furniture Heat Release Rates Measured with a Furniture Calorimeter”, NBSIR 82-2604,National Institute of Standards and Technology,Washington 1982.
[12] JANSSENS,M.,Calorimetry,The SFPE Handbook of Fire Protection Engineering 3rd edition,National Fire Protection Assn,2002,Section 3,Chapter 2.
[13] CBUF,Fire safety of upholstered furniture—The final report on the CBUF research pro- gramme ed.Sundstrom,B.,Interscience Communications Ltd,London 1996.
[14] WICKSTROM,U.,Application of the Standard Fire Curve for Expressing Natural Fires for Design Purposes,Fire Safety:Science and Engineering,ASTM STP 882 or SP-RAPP 1986: 19.EN 1991-l-2:2002,EuroCode 1.Actions on structures.General Actions.Actions on structures exposed to fires,Annex A.
[15] EN 1991-1-2 :2002, EuroCode 1. Actions on structures.General Actions.Actions on structures exposed to fires,Annex A.
[16] EN 1991-1-2:2002,EuroCode 1. Actions on structures.General Actions.Actions on structures exposed to fires, Annex B.
查找
上节
下节
返回
顶部
顶部
- 上一节:附录D (资料性附录)设定火灾场景的选择示例(日用品仓库火灾)
- 下一节:没有了
目录导航
- 前言
- 引言
- 1 范围
- 2 规范性引用文件
- 3 术语和定义
- 4 符号
- 5 概述
- 6 设定火灾场景
- 7 设定火灾
- 7.1 概述
- 7.2 基本特征
- 7.3 设定火灾场景提供的参数
- 7.4 需要确定的参数
- 7.5 火灾发展评估
- 附录A (资料性附录)本部分与ISO/TS 16733:2006的章条编号对...
- 附录B (资料性附录)本部分与ISO/TS16733:2006的技术性差异及...
- 附录C (资料性附录)设定火灾场景的选择应用示例(多功能室内体育馆火灾)
- 附录E (资料性附录)典型的火灾增长类型
- 附录D (资料性附录)设定火灾场景的选择示例(日用品仓库火灾)
- 参考文献
-
笔记需登录后才能查看哦~